siemens se54230gb/07 d/w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › siemens se54230gb/07 d/w

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 6, 2005 at 10:56 am #13853
    hilly
    Participant

    ive removed blockage from pump impellor but the display is flashing a no1 and the normal wash light is flashing (the second one from left) if i turn it off at the mains the drying indicator comes on but when the on/ off switch is turned off & on it goes back to the above, no other buttons will operate i guess there must be some way to reset it? any ideas?


    thanks paul

    December 6, 2005 at 1:37 pm #156951
    Martin
    Participant

    Re: siemens se54230gb/07 d/w

    Press and hold in the first and third programme buttons for 3 secs whilst the machine is on will clear any error. If it doesn’t then the module is faulty!

    December 9, 2005 at 7:26 pm #156952
    hilly
    Participant

    Re: siemens se54230gb/07 d/w

    one of the lugs on the module case had broken so the third button wouldnt connect does anyone know if i can get the case on its own or do i have to buy the complete module?

    thanks paul

    December 9, 2005 at 8:03 pm #156953
    clayside
    Participant

    you can get the housing (module case) from BSH part no 264946 £12.70 + p&p +VAT
    Clayside

    December 10, 2005 at 9:17 am #156954
    gegsy
    Participant

    Re: siemens se54230gb/07 d/w

    Or you could try shop@ for your spare 😉

    Greg

    December 10, 2005 at 10:51 pm #156955
    hilly
    Participant

    Re: siemens se54230gb/07 d/w

    thanks for help

    paul

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.