Hotpoint FFS70S Total Failure ! !

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Hotpoint FFS70S Total Failure ! !

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 6, 2005 at 11:29 am #13856
    Nig
    Participant

    Hi folks. Hotpoint FFS70S frost free fridge freezer, Pentane cooled R600a, only 2 yrs old. Total failure, as if a fuse, but it is getting power to the first board on the side of the black tank ( compressor ?) 😳
    Nothing works, no lights, no fan etc. Took off internal rear panel in freezer, not iced up or anything. I’m on disability, which is £75 a week, so £90 hotpoint service is currently out of reach. Can anyone help ? I am electrically competent, but know little of freezers. Any advice gratefully appreciated, many thanks, Nig.

    December 6, 2005 at 1:10 pm #156962
    Dave_Conway
    Participant

    Re: Hotpoint FFS70S Total Failure ! !

    It sounds like the main PCB to be honest 🙁

    You could check the repairs@ link below for an Independant engineer which may prove more cost effective 😉

    Dave.

    December 6, 2005 at 1:34 pm #156963
    Nig
    Participant

    Re: Hotpoint FFS70S Total Failure ! !

    Thanks Dave, did that, but no-one in my area. ( Edinburgh ). Guess I’ll try yellow pages, but can’t help but feel thats a lottery regarding price versus knowledge etc. mMaybe I should wait until I’ve got the Hotpoint £90 saved up. At least it will be a set cost.
    Many thanks anyhoo, Nig

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.