Whirlpool DWF B10 (IKEA) – residue marking glassware

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool DWF B10 (IKEA) – residue marking glassware

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 18, 2005 at 5:06 pm #14137
    PaulW
    Participant

    Hi there
    This washer seems to constantly leave small particles of dirty crytalised residue in the upper inside of glassware. I live in a soft water area and have rarely added salt. The stuff is very difficult to remove and requires soaking and hand washing. Any ideas ?

    Any healp appreciated. PaulW

    December 18, 2005 at 5:17 pm #158233
    Penguin45
    Participant

    Re: Whirlpool DWF B10 (IKEA) – residue marking glassware

    Have a little read of this:
    http://www.ukwhitegoods.co.uk/modules.p … age&pid=37
    for some general guidance.

    In addition, check the obvious – rotors clear, filters not choked. It is advisable to still use salt in the machine, regardless of water softness. A certain amount will still be used by the softener circuits.

    Perhaps you could advise what cleaning agent you are using? Long experience suggests that sticking with powder and rinse aid as separates produces the best results.

    HTH,
    Regards,
    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.