Creda condenser dryer TCR2, thermostat pair.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Creda condenser dryer TCR2, thermostat pair.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 3, 2006 at 5:12 pm #14477
    megawatt
    Participant

    Having problems finding the part number of the heater thermostat pair.Does any body know it? The stat has a light blue/cream spot on it.
    Waiting on the edge of my chair with suspence,
    Mike.

    January 3, 2006 at 5:27 pm #159597
    Dave_Conway
    Participant

    Re: Creda condenser dryer TCR2, thermostat pair.

    This was discussed last week I think or a similar model, complete heater only for this model, part number 1703005 😥

    Dave.

    January 3, 2006 at 6:16 pm #159598
    wilf
    Participant

    Re: Creda condenser dryer TCR2, thermostat pair.

    hope a pattern pair come along soon or its going to be a dear repair!

    January 3, 2006 at 7:27 pm #159599
    megawatt
    Participant

    Re: Creda condenser dryer TCR2, thermostat pair.

    Thanks for your help Dave,I will pass the bad news and bill on to the customer.
    Regards,
    Mike.

    January 3, 2006 at 7:37 pm #159600
    iadom
    Moderator

    Re: Creda condenser dryer TCR2, thermostat pair.

    That part number includes a new back panel, needed to prevent the fan fouling the old panel. you need to change all parts. (ATM)

    January 5, 2006 at 6:25 pm #159601
    megawatt
    Participant

    Re: Creda condenser dryer TCR2, thermostat pair.

    Further hot developments! Connect out of stock.
    Looked at the light blue stat and found a pin hole on it. Stick a pin in it and it resets!!! I presume this is the one shot device which is now a two shot device. Has any one else tried this?

    January 5, 2006 at 7:32 pm #159602
    iadom
    Moderator

    Re: Creda condenser dryer TCR2, thermostat pair.

    Many times, even drilled a tiny hole in the back of green spot 1701583 one to reset, you still need to investigate any possible causes of failure though.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.