diplomat d/washer adp8242

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › diplomat d/washer adp8242

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 5, 2006 at 7:41 pm #14569
    deltra
    Participant

    hi all, been looking thro the search facility and cant find fault code or how to reset this machine ❓ the fault is the 4th+5th lights(from left) are flashing. any help would be appreciated 😛

    January 5, 2006 at 8:23 pm #159925
    Penguin45
    Participant

    Re: diplomat d/washer adp8242

    4+5 not a recognised code. To attempt reset:

    Switch off. Switch on and press start button 4 times within 3 seconds. Switch off, switch on, run prewash programme.

    Good luck,
    Chris.

    January 6, 2006 at 12:36 am #159926
    deltra
    Participant

    Re: diplomat d/washer adp8242

    cheers chris,i’ll give that ago.but that is the position that the lights are in.

    January 6, 2006 at 12:37 am #159927
    Penguin45
    Participant

    Re: diplomat d/washer adp8242

    Yeah, I believe you – it’s just gone a bit bonkers at the moment 😉 .

    Chris.

    January 6, 2006 at 12:04 pm #159928
    NWAR
    Moderator

    Re: diplomat d/washer adp8242

    Penguin45 wrote:4+5 not a recognised code

    Sometimes the board will go on to this sequence after previously displaying another fault code. If you find this, run the machine again and when it stops you should get the proper fault code; you’ll probably end up with 1,2 & 3 flashing & 5 on (E7). This will normally just be a reset job as P45 described above.

    I have no idea why it does this 😕

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.