Smeg DWI 67.1 Dishwasher Error 7

Re: Smeg DWI 67.1 Dishwasher Error 7

Navillus,

Your machine is registering a fault with part of the pressure fill system.

This is most likely a fault with the board to be honest, and it may well just need reset. Do a forum search for Smeg AND reset or Diplomat AND reset to find out more about how to try this.

There is also the possibility that the board may have failed (£126.80 excluding VAT & P+P to replace).

There may also be a blockage within the fill system.

I’d try a reset first, and if that doesn’t cure the problem I’d recommend that you get an expert in to diagnose and repair the fault for you. Try Repairs@ for someone local.

Re: Smeg DWI 67.1 Dishwasher Error 7

Navillus wrote:Anybody know how to reset a smeg Dishwasher DWI 67.1, there are plenty of references about resets but I cannot find any description of how to actually carry the reset out.

Any help would be much appreciated.

Re: Smeg DWI 67.1 Dishwasher Error 7

NWAR wrote:Open door

Switch on with door on/off button

Within 3 secs (before display comes on) press programme button 4 times

Lights 1 & 5 should now be flashing (if not repeat until you have this situation)

Press programme button once more and you should be left with only the 5th light flashing.

Switch off (don’t close door)

Leave for a few seconds then switch back on.

Select programme and close door

Machine should now work (stick it on a rinse – if it gets past the main fill you should be OK)