bernstein 01-800270 DW overfills

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bernstein 01-800270 DW overfills

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 12, 2006 at 8:16 pm #14771
    bubs
    Participant

    Any advice here would be appreciated. Fixed a customers WM and was asked to look at the DW; a Bernstein 01-800270 (Servis I think). It intermittently overfills, flooding the floor. There is a pressure chamber under the filters with a 4 screw lid and an o-ring seal. This is all clean. I didn’t have time to pull it out, is there and common problem with this machine (p-switch, o-ring not sealing) or are they usually just blocked further up the pipe?

    Cheers
    Graeme

    January 12, 2006 at 9:34 pm #160760
    Dave_Conway
    Participant

    Re: bernstein 01-800270 DW overfills

    I can confirm it is a Servis, personally I’ve never had one overfill on me though (that I can remember anyway).

    Loosely fitted pressure hose maybe at either end an intermittent pressure switch ?

    Dave.

    January 12, 2006 at 10:02 pm #160761
    goosegreen
    Participant

    Re: bernstein 01-800270 DW overfills

    I have had a few overfilling and when they do the pressure S/W tube is flooded. Changed P/S (SER52000300) cured fault.


    Goosegreen

    January 12, 2006 at 11:02 pm #160762
    bubs
    Participant

    Re: bernstein 01-800270 DW overfills

    Thanks, will order a presure switch.
    Graeme

    January 16, 2006 at 7:56 pm #160763
    kwaremont
    Participant

    Re: bernstein 01-800270 DW overfills

    I have repaired a few of these with this fault in every case it
    was the 4 screw pressure pot lid “o” ring Steve

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.