Creda hi speed grill dilema

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Creda hi speed grill dilema

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 12, 2006 at 8:19 pm #14772
    cornwell40
    Participant

    Are hi speed grill assemblies 6224727 and 6101897 interchangeable.
    Masterpart showed the newer type for a 49723 cooker and when we got it to the customer its the older type thats needed. If they are it saves a return (and the customer about£60 😯 )

    Tony C

    January 12, 2006 at 9:15 pm #160764
    Dave_Conway
    Participant

    Re: Creda hi speed grill dilema

    They’re physically different

    6224727 is 380x400mm and 6101897 is 370x375mm

    In theory I suppose as the cheaper one is smaller it may be “coaxed” in there somehow, never tried myself though 😉

    Dave.

    January 13, 2006 at 9:10 am #160765
    Seamy
    Participant

    Re: Creda hi speed grill dilema

    Cheaper one can be put in, from memory i think the enamel guard/bracket on the original does not fit the new one. Holes have to be made in roof of top oven for self tapping screws to mount it. I’ve found using a sharp bradawl & tap of hammer makes small holes & self tapping screws will then srew in . Saves a packet as one of these grill elements is £100 rrp while other is £40ish rrp..

    January 13, 2006 at 8:16 pm #160766
    cornwell40
    Participant

    Re: Creda hi speed grill dilema

    Yup, worked a treat :tup:
    Hacksawed off the front crosspiece of the old grill assembly to use as a bracket, as the only difference in fitting is that the front two retainers are missing on the new.
    My good deed for the day.


    Tony C

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.