Part P Kitchen Regulations(electrical)

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Part P Kitchen Regulations(electrical)

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #14784
    maltheviking
    Participant

    Have a look at this site

    http://tinyurl.com/7z5xl

    I have also posted this on the Legal Forum under “Part P Or Not To Part P”
    It is interesting to note section “H” and the requirements for kitchen appliances.
    In my previous life as a sparky it was GOOD PRACTICE to have socket outlets or switch fuses in easy access. My personal preference was to make sure that the appliance was switched from above a worktop, so as immediate isolation could be achieved in an emergency.
    If section H were complied with, then the appliance would have to be moved before isolation could be achieved. Dangerous if the appliance is “live”due to a fault, or possible flooding. I would not expect a customer or myself to have to pull the machine out in these circumstances. Any competent person would obviously switch off at the consumer unit, but can the average householder be expected to think this way. Part P is obviously taking a step backwards. 👿

    (URL edited by Martin…it was too long!)

    #160794
    maltheviking
    Participant

    Re: Part P of the building regs

    How did you do that Martin?

    #160795
    Dave_Conway
    Participant

    Re: Part P of the building regs

    http://www.tinyurl.com 🙂

    Dave.

    #160796
    maltheviking
    Participant

    Re: Part P of the building regs

    Now there’s a thing!!

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.