ADP 8242 Error Code E2

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › ADP 8242 Error Code E2

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • January 18, 2006 at 10:15 pm #14940
    trukkie
    Participant

    Hi

    Tried a search for E2 but nothing showed so …

    can someone give me some pointers on what to do about this particular error ….cheers

    Basic symptoms: machine starts cycle, gets halfway through rinse then
    quits, empties beeps and shows an E2

    Machine is 3 years old

    Any info appreciated

    ta

    January 18, 2006 at 10:22 pm #161395
    gegsy
    Participant

    Re: ADP 8242 Error Code E2

    Hi trukkie
    Look at the sticky at the top of this forum 😉

    Greg

    January 18, 2006 at 10:47 pm #161396
    trukkie
    Participant

    Re: ADP 8242 Error Code E2

    Cheers greg 😳

    did a search for E2 but it returned 0 …

    time to get the hose out !

    😀

    January 18, 2006 at 10:51 pm #161397
    gegsy
    Participant

    Re: ADP 8242 Error Code E2

    Its actually a “Sticky” at the top of the dishwasher forum listing viewtopic.php?f=33&t=8046

    greg

    January 18, 2006 at 11:17 pm #161398
    kwatt
    Keymaster

    Re: ADP 8242 Error Code E2

    There’s also the artilce that that nice Penguin wrote HERE

    There’s lot’s of good stuff in the “Articles & Help” section. 😉

    K.

    January 18, 2006 at 11:47 pm #161399
    trukkie
    Participant

    Re: ADP 8242 Error Code E2

    Cheers kwatt

    Last question … honest

    does anyone know where the transfer tube is on an ADP 8242 ?

    Had a look into the sump – no black flap

    just a hole to the left and can feel an inlet under the front bottom edge
    of the sump – could be ?

    ta

    January 19, 2006 at 12:06 am #161400
    gegsy
    Participant

    Re: ADP 8242 Error Code E2

    Once you take the filters out, in the recess, the black flap is un missable, unless it is missing 😯 I have seen this and would cause this fault 😉
    Obviously if its missing you wil be left with a hole approx diameter of the old halfpenny.

    Hi Ken, hows Del :wave:

    Greg

    January 19, 2006 at 12:48 pm #161401
    trukkie
    Participant

    Re: ADP 8242 Error Code E2

    Oh dear !

    looks like I’m missing the black flap then coz there’s nothing
    black in the bottom of th sump – all nice white shiny plastic !

    thanks for the info greg

    off to the spares dept âž¡

    cheers

    February 5, 2006 at 5:20 pm #161402
    trukkie
    Participant

    Re: ADP 8242 Error Code E2

    Hi all,

    Well I finally got the dishwasher apart and found the pressure tube which runs from the sump to the pressure switch (loops over distributor)
    was completely split in two.

    Not sure if it has ruptured or a mouse! has got at it.

    Anyway does anyone know where I can get a replacement pressure tube

    cheers
    Trukkie

    p.s big thanks to P45 for the help

    February 5, 2006 at 6:05 pm #161403
    Penguin45
    Participant

    Re: ADP 8242 Error Code E2

    Bit of windscreen washer tubing from Halfords is cheapest and quickest option.

    Penguin45.

    February 5, 2006 at 6:53 pm #161404
    kwatt
    Keymaster

    Or if you need the right bit an email to spares@ukwhitegoods.co.uk will get it sorted. 😉

    K.

    February 6, 2006 at 12:51 pm #161405
    trukkie
    Participant

    Re: ADP 8242 Error Code E2

    Top tip !

    cheers 😀

    February 7, 2006 at 6:29 pm #161406
    trukkie
    Participant

    Re: ADP 8242 Error Code E2

    IT WAS A MOUSE !!!!!

    found loads of mouse droppings and bits of rubber in the bottom tray

    Perhaps Penguin could update the E2 failure page with mouse sabotage 😆


    Cheers

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.