Bosch WFC2466

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WFC2466

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • January 27, 2006 at 5:22 pm #15190
    iadom
    Moderator

    WFC2466GB/01
    FD 8305800003

    Apparantly customer selects programme, display shows 44, presses start and nothing happens other than ‘ready’ light on. She says door will open straight away. Does this sound like a door lock problem, will order one before going if needs be.

    January 27, 2006 at 6:43 pm #162556
    Bryan
    Participant

    Re: Bosch WFC2466

    Don`t know where all the Bosch experts are tonight Jim 😆 but I would agree with you on faulty door interlock. Part No. 182154

    Bryan

    January 27, 2006 at 7:49 pm #162557
    gegsy
    Participant

    Re: Bosch WFC2466

    Hi Jim

    I would say interlock,door striker and interlock plug; all worth a look.

    Greg

    PS – Check yer email 😉

    January 27, 2006 at 7:55 pm #162558
    iadom
    Moderator

    Re: Bosch WFC2466

    Thanks for replies folks,
    No e-mail arrived yet, ❓

    January 27, 2006 at 7:58 pm #162559
    gegsy
    Participant

    Re: Bosch WFC2466

    NTL one Jim 😉

    Greg

    January 27, 2006 at 8:10 pm #162560
    iadom
    Moderator

    Re: Bosch WFC2466

    gegsy wrote:NTL one Jim 😉

    Greg
    That explains why I haven’t got it yet then. One or two have been slow to arrive in last few hours.
    Try sending it to my Zen addy and I guarantee it will be here before you have lifted your finger of the keyboard. 🙂

    January 29, 2006 at 1:42 am #162561
    BSH-MAN
    Participant

    Re: Bosch WFC2466

    Sounds like door lock, possible module.

    February 3, 2006 at 4:30 pm #162562
    iadom
    Moderator

    Re: Bosch WFC2466

    Just to put this to bed, tried new doorlock without success, checked module for any obvious signs of damage but found none. As this machine is a slimline and very thin on the ground, and as I could not be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain the module was faulty without the official test software I decided it was not worth the risk ordering a £101 inc vat module. I advised the customer to contact Bosch and advise me of the outcome. She has just phoned to confirm that the module was indeed faulty. The good news is that due to the machine being just over 2 years old, Bosch are going to fit the part for labour only. Bad news is it has to be ordered from Germany and ETA is around 18th Feb.

    Thanks to Gegsy for his help in the background. :tup:

    February 3, 2006 at 4:45 pm #162563
    Martin
    Participant

    Re: Bosch WFC2466

    iadom wrote:As this machine is a slimline and very thin on the ground

    I loved the pun by the way Jim (thin on the ground)….. 😆

    But my point is, I never knew Bosch did a 40cm deep machine until this thread cropped up (Thinks…I wonder if Don knows??)

    In the past there have been many enquiries over machines with a shallow depth. Zanussi did one a few years ago (i.e FL853) and Baumatic also.

    Interesting stuff!

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.