Bosch SGI5305GB/13 FD 7912 Dead

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGI5305GB/13 FD 7912 Dead

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 30, 2006 at 5:46 pm #15251
    Electricmalc
    Participant

    First job on a Monday morning 😡

    Customer reports machine stopped midway on a wash, no lights, nothing.

    Supply to socket ok ,fuse ok, off with the door panel, check supply at switch ok, check supply out of switch ok. check supply at computer board ok.
    Undo cover on computer board, burnt connection on relay pin (how many times have we seen that), but surely that is just for the heater, wouldn,t stop the whole machine, anyway resoldered and bridged pin. Try again still dead as a dodo. No other signs of bad connections on board.
    Cant think of anything else that would stop the machine from at least showing some signs of life. Did notice the transformer on the pcb was just warm, so supply to that ok.

    Now the big decision for a one man band, to risk getting a new pcb for £100 less disc, and if it doesn’t work then money down the drain.

    Any thoughts? appreciated.

    Mallc

    January 30, 2006 at 5:54 pm #162785
    gegsy
    Participant

    Re: Bosch SGI5305GB/13 FD 7912 Dead

    Hi
    This appliance is app 7 years old. What I do is point out the facts
    1/ Age
    2/ If that expensive part has gone, whats to say some other component isnt going to fail in the near future.
    3/ Replacing part may fix appliance but it may still have other problems
    Put the ball in their court as in as much to say, the decisions yours gven the facts.

    Off the record its 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} to be the module just cover yer ass 😉

    Greg

    January 30, 2006 at 6:05 pm #162786
    eastlmark
    Moderator

    Re: Bosch SGI5305GB/13 FD 7912 Dead

    do it mallc, point out its an intergrated and will cost a fair bit of cash and hassle to replace. If you are getting a feed to the board, it has to be that. only six years prob since they bought it, not really what we would class as old. Make sure you make a decent wedge for yourself too.

    January 30, 2006 at 6:14 pm #162787
    gegsy
    Participant

    Re: Bosch SGI5305GB/13 FD 7912 Dead

    Hi
    Sorry malc missed the integrated bit. Different ball game then. Anythin over 5yrs nowadays I class as oldish, not built like they used to be.

    Module 264811 app £80 + Vat

    See link below for spares.

    Greg

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.