Hotpoint WM63 – Not taking soap powder

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint WM63 – Not taking soap powder

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 6, 2006 at 9:11 am #15418
    AndyWh
    Participant

    I have a Hotpoint WM63 that doesn’t take the powder from the right hand section of the dispensing draw but it does take the fabric conditioner from the left hand side.

    I’ve changed the brushes on the motor but no change.

    Any ideas?

    Many thanks.

    February 6, 2006 at 9:27 am #163517
    Simon46
    Participant

    Re: Hotpoint WM63 – Not taking soap powder

    Have you got a good hot water supply to machine? If you fill the machine on the 95 degree wash does hot water come in?

    Regards
    Simon

    February 6, 2006 at 9:41 am #163518
    AndyWh
    Participant

    Re: Hotpoint WM63 – Not taking soap powder

    I’m at work at the moment. I’ll try that when I get home but I know I’ve got a good hot water supply and the draw holes are clear.

    If I have a good supply what else could be the problem?

    Thanks for your help

    Andy W

    February 6, 2006 at 10:17 am #163519
    Simon46
    Participant

    Re: Hotpoint WM63 – Not taking soap powder

    Inlet valve. Unplug power if you are going to have a look yourself.

    S.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.