Hotpoint WF640G

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WF640G

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 8, 2006 at 2:49 pm #15487
    Panther
    Participant

    Can any of you guys out there help please? We have a rogue Hotpoint…. The machine shows “TEST” on all programs. It wont fill, pump wont activate. The only thing it will do is spin after a couple of minutes at the end of the test cycle. (Serial Number= 34118318). All display lights go across.

    Thanks for your time… 😯 🙄

    February 8, 2006 at 3:07 pm #163782
    mowerman80
    Participant

    Re: Hotpoint WF640G

    HOTPOINT washing machines stuck in “test” mode late models e.g. WF630G with display on fascia.
    This is caused when user accidentally pushes on/off and start buttons simultaneously.
    To exit test mode press start again > display goes wild>press start again>display settles down >
    then press on/off plus start buttons simultaneously and hold for few seconds till display reads “D:end” or “D:off” or similar.
    Machine should now function normally.

    Yet to be learned how to conduct test mode.

    February 8, 2006 at 3:08 pm #163783
    macmini
    Participant

    Re: Hotpoint WF640G

    search the forums, this has been documented many times.

    February 8, 2006 at 3:10 pm #163784
    macmini
    Participant

    Re: Hotpoint WF640G

    :wave:

    February 8, 2006 at 3:18 pm #163785
    Panther
    Participant

    Re: Hotpoint WF640G

    Thanks Mowerman, all o.k. now.

    Macmini… 😀 😀 Thanks!!!

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.