BEKO W/M

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BEKO W/M

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 9, 2006 at 8:04 am #15507
    A1TEC
    Participant

    Going to check a Beko WMB 10W washer later, customer says she sets machine on program 4 and machine moves very quickly to program 5 and sticks there.

    Not familiar with these machines any ideas on poss probs.

    cheers
    John.

    February 9, 2006 at 8:41 am #163863
    Martin
    Participant

    Re: BEKO W/M

    Probably position 5 in this case being the ‘heater’ position 😉

    February 9, 2006 at 4:20 pm #163864
    A1TEC
    Participant

    Re: BEKO W/M

    Right on the money Martin! Went along earlier this morning, found wire off heater due to house move a few days before.

    Cheers
    John.

    February 9, 2006 at 4:41 pm #163865
    Martin
    Participant

    Re: BEKO W/M

    A1TEC wrote:Right on the money Martin!

    No!…..you cop the money and enjoy….Cheers 🙂

    February 10, 2006 at 2:33 pm #163866
    andy2
    Participant

    Re: BEKO W/M

    Martin wrote:Probably position 5 in this case being the ‘heater’ position 😉

    Martin – is this Beko’s method for signifying a fault code by stopping on a certain position?

    If so, do you have all the codes, it would be good to stick them in the error codes thread

    Andy 😀

    February 13, 2006 at 9:14 pm #163867
    Phidom
    Participant

    Re: BEKO W/M

    All they need is an illuminated window in the control panel with the message “Please deposit this appliance in the nearest skip” :rotl:

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.