BEKO W/M

[A1TEC]

Going to check a Beko WMB 10W washer later, customer says she sets machine on program 4 and machine moves very quickly to program 5 and sticks there.

Not familiar with these machines any ideas on poss probs.

cheers
John.

[Martin]

Re: BEKO W/M

Probably position 5 in this case being the ‘heater’ position 😉

[A1TEC]

Re: BEKO W/M

Right on the money Martin! Went along earlier this morning, found wire off heater due to house move a few days before.

Cheers
John.

[Martin]

Re: BEKO W/M

A1TEC wrote:Right on the money Martin!

No!…..you cop the money and enjoy….Cheers 🙂

[andy2]

Re: BEKO W/M

Martin wrote:Probably position 5 in this case being the ‘heater’ position 😉

Martin – is this Beko’s method for signifying a fault code by stopping on a certain position?

If so, do you have all the codes, it would be good to stick them in the error codes thread

Andy 😀

[Phidom]

Re: BEKO W/M

All they need is an illuminated window in the control panel with the message “Please deposit this appliance in the nearest skip” :rotl:

[Author]

Posts