Bosch S5C27B won’t fill

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bosch S5C27B won’t fill

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 11, 2006 at 3:31 pm #15580
    hgibson
    Participant

    A Bosch S5C27B (details below) won’t fill. Therefore it gets stuck at the initial fill stage. When turning it off and on at this point there is a faint “chonk” noise which may indicate a solenoid opening up. Some water gets in but not a lot.

    Pumping out seems to be OK.

    It’s just been moved which may have upset it. There is water in the pipes – a washing machine on the same pipework is working fine.

    Is there a likely fault? If not, what would the likely charge be for a callout (in Lancaster).

    Details:
    E Nr. SMS6012GB/20
    FD7603 810208
    19603210211645310208
    Type S5C27B

    Hugh

    February 11, 2006 at 4:26 pm #164156
    gegsy
    Participant

    Re: Bosch S5C27B won’t fill

    Just moved mmm I would check for trapped or kinked hoses. Check that the valve is really on and not jsut in appearance as the plastic taps round on the brass locater.

    Greg

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.