merloni bearing kits

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › merloni bearing kits

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 21, 2006 at 7:51 pm #15804
    hilly
    Participant

    ive tried ordering bearing kits for indesit w123suk and sge12xuk but apparently there is different sizes of bearings and seals does anyone know the part nos and how many different ones there is and wheres best to get them then hopefully i can carry them on stock so im covered

    thanks paul

    February 21, 2006 at 9:32 pm #166394
    Phidom
    Participant

    Re: merloni bearing kits

    For the W123SUK you should find you need:
    Bearings 6205 & 6206, seal Part No. 082696.
    You can’t buy a bearing kit as such.

    February 21, 2006 at 9:52 pm #166395
    hilly
    Participant

    Re: merloni bearing kits

    when i enquired with indesit with w123suk they said there is different thicknesses of shafts so i guess they must have modified it during production by the way they spoke all the merloni machines like this one are this way. With the serial number they can tell u exactly which one it will be i was just hoping i would be able to carry a set of each on stock so i can complete job in one visit. (i ordered a set of bearings and a seal about two weeks ago from merloni but they wouldnt give me too much info and im still waiting for them to arrive!)


    paul

    February 21, 2006 at 11:30 pm #166396
    Phidom
    Participant

    Re: merloni bearing kits

    Don’t pay Merloni prices for bearings, look for a reasonable price kit containing the bearings you need and just buy the OEM seal. I think Connect do an AEG kit that contains the 6205 & 6206 (if that’s the ones you need).

    February 22, 2006 at 1:35 am #166397
    leavemetogetonwithit
    Participant

    Re: merloni bearing kits

    When you find out the sizes you need Seme do a good range of 2RS bearings (waterproof) at very reasonable prices. Also a good selection of seals though you need to check the quality as I received some Hotpoint single lipped ones the other day. Don’t think I’ll use them.
    Mike.

    February 22, 2006 at 11:54 pm #166398
    aqualectric
    Participant

    Re: merloni bearing kits

    Phidom wrote:Don’t pay Merloni prices for bearings, look for a reasonable price kit containing the bearings you need and just buy the OEM seal. I think Connect do an AEG kit that contains the 6205 & 6206 (if that’s the ones you need).

    Bearing kit part no. BRG6091(Connect) and seal part no. 082696 (genuine Merloni part) is certainly the cheapest way of assembling a bearing kit for these machines. 😉

    February 23, 2006 at 9:24 am #166399
    nigegt
    Participant

    Re: merloni bearing kits

    The smaller shaft type is alot less popular seal no. 039667 and 6204 and 6205 bearings, we carry both kits as stock if you need em Paul

    Nige

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.