servis m6005 door

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › servis m6005 door

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 22, 2006 at 8:00 pm #15827
    wilf
    Participant

    machine in rented property previous tennants dog chewed door and boot new tennant said door not shutting properly. fitted boot and interlock but cant get the latch to make the interlock operate unless I take off the trim and push the catch(springs ok). cant see any distortion on the door or machine have ordered new (special order electrue) but was wondering if anyone else has had similar, especially as this machine has fold back type hinge.

    wilf

    February 22, 2006 at 8:11 pm #166510
    BobHope
    Participant

    Re: servis m6005 door

    hi wilf
    had this problem before, was the door interlock the same as the one you took off the appliance or was it looks the same differant colour, if so the door latch pecker does not make contact, dont ask why but a genuine interlock solved the problem somthing to do with the length of the door pecker catch according to servis technical.

    Bob.

    February 23, 2006 at 10:06 am #166511
    nigegt
    Participant

    Re: servis m6005 door

    Had same problem and was down to replacment door lock, had to order a gen part (normally use hotpoint wm interlocks if it’s the type with a removable latch plate they work great but not this time!)

    Nige

    February 23, 2006 at 3:52 pm #166512
    wilf
    Participant

    Re: servis m6005 door

    thanks lads. original was rold new one metalex Ill order again, it was supposed to be genuine but it just came lose in a bag.

    wilf

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.