Bosch Fride/freezer – E2 error code

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Bosch Fride/freezer – E2 error code

Viewing 15 posts - 1 through 15 (of 25 total)
1 2
  • Author
    Posts
  • March 2, 2006 at 9:22 am #16034
    liviterminator
    Participant

    Having read through the forum, I guess I need the service board that everyone talks about, but just need confirmation, looked for E number, but courtesy of Bosch, they put it where it gets rubbed by the box.

    Last couple of digits that I can see are ..201GB/01. Fridge was purchased Oct ’96.

    At the bottom of the label, I can see ‘KG UU 32A’


    thx.

    March 2, 2006 at 10:01 am #167278
    gegsy
    Participant

    Re: Bosch Fride/freezer – E2 error code

    Hi
    Model is KGU3201GB/01 the PCB you need is 263782 use link below.

    Greg

    March 2, 2006 at 10:33 am #167279
    liviterminator
    Participant

    Re: Bosch Fride/freezer – E2 error code

    Thx, have filled in form.

    March 2, 2006 at 6:40 pm #167280
    liviterminator
    Participant

    Re: Bosch Fride/freezer – E2 error code

    Have just been told by repair guy that the temp sensor is replacable and the board is not needed….


    Help !!!! any advice??

    March 2, 2006 at 7:02 pm #167281
    gegsy
    Participant

    Re: Bosch Fride/freezer – E2 error code

    E2 is fridge evaporator sensor which is fitted into insulation of appliance at manufacture. Unless you want to drill it out (messy) I would go with the PCB.

    Greg

    March 2, 2006 at 7:31 pm #167282
    liviterminator
    Participant

    Re: Bosch Fride/freezer – E2 error code

    Pulled apart cover inside freezer, found various sensor cables and plugs, 3 sensors to the left on colour coded plugs, one fan power cable and another sensor on the right, all of which could be easily replaced.

    I take it is none of these then??

    Pity I couldn’t post a photo of the inside….

    March 2, 2006 at 7:35 pm #167283
    gegsy
    Participant

    Re: Bosch Fride/freezer – E2 error code

    Hi
    WHy are you in the freezer area?? When E2 is a fridge evaporator sensor problem?

    Greg

    March 2, 2006 at 7:43 pm #167284
    liviterminator
    Participant

    Re: Bosch Fride/freezer – E2 error code

    Has anyone ever tried getting to the sensor?

    Repair guy that I contacted from this site said that it was replacable and I didn’t need the board and that the fridge cooling came from the freezer unit…..

    March 2, 2006 at 7:48 pm #167285
    gegsy
    Participant

    Re: Bosch Fride/freezer – E2 error code

    Hi
    Not that I know of. It doesnt sound a good option personally.
    I would use an engineer from the link below if I were you so that you get the correct information. 😉
    Greg

    March 2, 2006 at 8:01 pm #167286
    liviterminator
    Participant

    Re: Bosch Fride/freezer – E2 error code

    I did!

    Just seems strange, when you look at this unit, everything so far has the look of being replacable except obviously the cooling elements…

    March 2, 2006 at 8:07 pm #167287
    gegsy
    Participant

    Re: Bosch Fride/freezer – E2 error code

    The fridge refrigerant is fed to the from the freezer via a diverter valve. This howeever has nothing to do with an E2 error being displayed.

    Greg

    March 2, 2006 at 8:08 pm #167288
    liviterminator
    Participant

    Re: Bosch Fride/freezer – E2 error code

    Thx for that. things are a bit clearer…

    March 2, 2006 at 8:11 pm #167289
    liviterminator
    Participant

    Re: Bosch Fride/freezer – E2 error code

    Can anyone recommend a source for these boards, the repair guy I contacted wasn’t interested in supplying unless they fitted it as well… 😥

    March 2, 2006 at 8:11 pm #167290
    superfix
    Participant

    Re: Bosch Fride/freezer – E2 error code

    Gegsy IS right this is a FOAMED IN FRIDGE sensor problem. It is indeed UNREPLACEABLE.

    The only cure is a new pcb 263782

    March 2, 2006 at 8:19 pm #167291
    gegsy
    Participant

    Re: Bosch Fride/freezer – E2 error code

    liviterminator wrote:Can anyone recommend a source for these boards, the repair guy I contacted wasn’t interested in supplying unless they fitted it as well… 😥

    Hi try here shop@

    Regards

    Greg

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 25 total)
1 2
  • You must be logged in to reply to this topic.