Need explaination on C/D parts

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Need explaination on C/D parts

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 5, 2006 at 12:08 pm #16111
    Fairdeal
    Participant

    Hi,
    Could anyone one kindy explain the functions of the two stats on a tumble dryer i.e. the one shot and cycling sensors.Also if you could expalin the relay function as well.

    Thanks

    March 5, 2006 at 12:16 pm #167579
    gegsy
    Participant

    Re: Need explaination on C/D parts

    Hi
    The 1 shot stat is a thermal overload ie over heat due to many reasons, fan failure,vent blockage etc.
    Thew cycling stat is as it says, it cycles the temp of the drum to the correct working temp.
    The relay is used where a low voltage and current can switch larger loads ie heating elements.

    Greg

    March 5, 2006 at 9:09 pm #167580
    bobokines
    Participant

    Re: Need explaination on C/D parts

    The relay on condenser dryers is a latching relay that ensures that someone has to be present to turn the appliance on. This is due to the large loading door which is large enough for a child to climb in.

    Bob

    March 6, 2006 at 10:39 am #167581
    Fairdeal
    Participant

    Re: Need explaination on C/D parts

    Thanks very much for the explainations, it has cleared my concept of these parts.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.