dishwasher no heat

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › dishwasher no heat

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 15, 2006 at 10:22 am #16368
    bigred
    Participant

    hi

    diplomat d/washer mod adp 8224

    this machine runs for about 10 min on a program but does not heat
    just emptys & fills like it just rinses.
    it does not show any error codes , stops as if the prog has done.

    any idea’s thanks

    March 15, 2006 at 10:54 am #169543
    tintin
    Participant

    Re: dishwasher no heat

    There is a few things that can cause that,but I would check the heating element 1st,might be open circuit.

    March 15, 2006 at 12:12 pm #169544
    bigred
    Participant

    Re: dishwasher no heat

    the element & stat test out ok

    March 15, 2006 at 1:46 pm #169545
    Dave_Conway
    Participant

    Re: dishwasher no heat

    If there’s definitely no error code on the LCD display then it points to the PCB itself to be honest 🙁

    There are other factors though that can cause software errors on these, I would recommend an engineer on this one as the PCB is over £100 and a wrong diagnosis could prove costly, check the repairs@ link below 🙂

    If you do procede, power off please when checking :zap:

    Dave.

    March 15, 2006 at 2:26 pm #169546
    bigred
    Participant

    Re: dishwasher no heat

    ran it through another prog got warm on wash but completed too quick

    with no dry at the end.

    so it does look like PCB is up the creek 😆

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.