Bosch Model No SGS5358GB/17

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch Model No SGS5358GB/17

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • March 31, 2006 at 4:31 pm #16813
    funkyboogy
    Participant

    not been to yet..wont fill… pump runs,occording to customer
    any ideas ???
    cheers funky

    March 31, 2006 at 6:18 pm #171683
    bendaireboy
    Participant

    Re: Bosch Model No SGS5358GB/17

    sound’s like water leak into base activating float causing drain pump to run,i’d look at pumps for leakage hope this helps regard’s nige 🙂

    March 31, 2006 at 6:47 pm #171684
    gegsy
    Participant

    Re: Bosch Model No SGS5358GB/17

    Hi
    If no water in base, I would suspect module. When you look at 7 seg display when you go; if there is a red dot in the display then definite module.
    Remove l/h panel check pressure chamber for crud, also remove lower front and remove 1foot length ribbed hose and clean.

    Regards

    Greg

    April 1, 2006 at 2:49 pm #171685
    funkyboogy
    Participant

    Re: Bosch Model No SGS5358GB/17

    UPDATE ON JOB
    went out took lhs panel as suggested….removed all the hoses and cleaned…also removed little flap valve thingy in sump…gave it a clean , put all back together….and happy days….thanks for advice
    funky..

    April 3, 2006 at 6:21 pm #171686
    BSH-MAN
    Participant

    Re: Bosch Model No SGS5358GB/17

    funkyboogy wrote:UPDATE ON JOB
    went out took lhs panel as suggested….removed all the hoses and cleaned…also removed little flap valve thingy in sump…gave it a clean , put all back together….and happy days….thanks for advice
    funky..


    You’ll go back!
    :clown:

    April 3, 2006 at 6:45 pm #171687
    funkyboogy
    Participant

    Re: Bosch Model No SGS5358GB/17

    Miby aye and Miby naw….
    but i do have a sneaking feeling a might be…

    April 3, 2006 at 8:31 pm #171688
    gegsy
    Participant

    Re: Bosch Model No SGS5358GB/17

    So whats the answer BSH MAN? Replace metering unit and ribbed hose and if really gunged the water matrix??

    Greg

    April 3, 2006 at 8:47 pm #171689
    superfix
    Participant

    Re: Bosch Model No SGS5358GB/17

    So whats the answer BSH MAN? Replace metering unit and ribbed hose and if really gunged the water matrix??

    Think he may be thinking flooded base problem Greg. However if it was just gunged up sump hose then cleaning will do the job, for a couple of years at least.

    April 3, 2006 at 8:51 pm #171690
    gegsy
    Participant

    Re: Bosch Model No SGS5358GB/17

    Hya Boro, thanks for that; was just wondering what more we could offer for a more reliable repair 😉 .

    Cheers

    Greg

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.