Whirlpool AWM6141/1

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWM6141/1

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • April 4, 2006 at 1:05 pm #16900
    johnnyhoz
    Participant

    Does anyone know what Faultcode F06 is?
    john

    April 4, 2006 at 1:37 pm #172074
    Martin
    Participant

    Re: Whirlpool AWM6141/1

    johnnyhoz wrote:Does anyone know what Faultcode F06 is?
    john

    Did you not find it in the “Known Error Codes” thread then Johnny?

    http://www.ukwhitegoods.co.uk/modules.p … c&start=15

    April 4, 2006 at 2:16 pm #172075
    johnnyhoz
    Participant

    Re: Whirlpool AWM6141/1

    Sorry Martin didnt realise there was more than one page of fault codes
    Cheers
    john

    April 4, 2006 at 3:00 pm #172076
    Martin
    Participant

    Re: Whirlpool AWM6141/1

    No problem mate, hope you get it fixed OK?

    April 6, 2006 at 11:17 am #172077
    johnnyhoz
    Participant

    Re: Whirlpool AWM6141/1

    F06 fault is Tachometer failure (no motor movement detected)
    The machine acts normally on lower spin speeds but set on 1500 top speed it cuts out and gives F06, has anyone come across this fault?
    I’ve checked the security of the tacho the brushes are fine the comm looks good.

    john

    April 6, 2006 at 11:48 am #172078
    Alanj
    Participant

    Re: Whirlpool AWM6141/1

    HAVE YOU CHECKED FOR BROKEN WIRES AT MOTOR PLUG/WIRING LOOM?

    April 6, 2006 at 12:02 pm #172079
    johnnyhoz
    Participant

    Re: Whirlpool AWM6141/1

    Yes everything looks normal
    john

    April 6, 2006 at 5:04 pm #172080
    Alanj
    Participant

    Re: Whirlpool AWM6141/1

    Hi John,

    did you give the wires a pull at the motor plug to make sure they weren’t just holding by the pvc sheath?(broken inside)

    Alan

    April 6, 2006 at 5:49 pm #172081
    johnnyhoz
    Participant

    Re: Whirlpool AWM6141/1

    Yes but I’ll Recheck
    thanks
    john

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.