Stoves 1200 DFa Range – Main oven door hinges

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Stoves 1200 DFa Range – Main oven door hinges

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 7, 2006 at 7:14 pm #16988
    cookerfit
    Participant

    I’ve got a job to replace door hinges ( reported broken main oven RH door hinge) tomorrow.
    We’ve got the parts (kit032494501) but have not done this job before.
    Can anyone advise of any pitfalls or difficulties on this job – or any routes which may make the job easier or harder ?

    Thanks in advance for any help, advice or info

    Regards

    Cookerfit

    April 7, 2006 at 9:15 pm #172445
    Dave_Conway
    Participant

    Re: Stoves 1200 DFa Range – Main oven door hinges

    Oh, deep joy 🙂

    Drop the door down, put two small rods (or screwdriver blades) through the bars that extend from the cabinet (spring loaded), slide the inner glass out, there’s two small plastic “stoppers”, you’ll see the heads just protuding past the left and right hand metal parts near the bottom, pull them out (tight fit but you should have new ones in the kit). Once they’re out, the door will slide off of the hinges (plastic foot attached to the bars that are now restricted from flying inside the cabinet).

    Take the feet off, fit the new ones and reverse the above 😀

    I hope that makes sense. If you want, PM me for my mobile and phone me from the house if you get stuck.

    Dave.

    April 7, 2006 at 9:58 pm #172446
    cookerfit
    Participant

    Re: Stoves 1200 DFa Range – Main oven door hinges

    Thanks Dave

    As stated, first time so you’ve saved me a lot of hassle

    Regards

    Cookerfit

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.