Hotpoint DC27P Wash light Error code

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Hotpoint DC27P Wash light Error code

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 11, 2006 at 6:30 pm #17071
    Firestarter
    Participant

    Could anyone tell me why the wash light flashes during fill on a Hotpoint DC27 slim dishwasher? It goes into fault mode putting the drain pump on. There is no water in the base to trip the float, the wash pump is free to turn, the water is not slow to fill and the drain pump works. Is it the temp sensor?

    April 11, 2006 at 10:24 pm #172871
    Dave_Conway
    Participant

    Re: Hotpoint DC27P Wash light Error code

    Which light is this flashing please, counting the lamps from left to right ?

    Dave.

    April 11, 2006 at 11:56 pm #172872
    Penguin45
    Participant

    Re: Hotpoint DC27P Wash light Error code

    Fill valve failure, methinks….

    Power off if checking.

    Regards,
    Penguin45.

    April 14, 2006 at 10:41 am #172873
    Firestarter
    Participant

    Re: Hotpoint DC27P Wash light Error code

    In answer to Dave Conway’s equery – The second lamp from the left is flashing. The fill valve opens and the machine fills to the correct level and fault condition occurs at this point. Thank you very much for your interest in my problem with this finest piece of engineering Indesit could come up with for Hotpoint.

    August 7, 2013 at 11:49 am #172874
    wss1976
    Participant

    Re: Hotpoint DC27P Wash light Error code

    This seems to be the same error as i have just posted about – did anyone find an answer? Thanks again.

    Will.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.