- This topic has 1 reply, 2 voices, and was last updated 20 years ago by
.
-
Posts
-
——————————————————————————–
I have a INDESIT WIDL 126 about 2 years old and out of warenty. About 3 months ago the main control board shorted out between tracks which in the end i could’nt repair so i got another. This was fitted and the machine ran like new untill now, once you turn the machine on it try’s to run a program for a moment after about 2 mins the machine stops and just fills and drains for 10 mins while this is happening the 3rd and 4th green led’s flash and the main red flashes fast. I have checked the main board again and can’t see any signs of damage pls help thanx
——————————————————————————–
After this i was told to check for any blockages in the pressure chmber and if this was clear change the pressure switch which i have done. i have to admit a mistake in the original post it is the 3rd and 4th green led that are flashing as well as the main red one 😳
- You must be logged in to reply to this topic.