I have changed the pressure switch no luck INDESIT WIDL 126

[david_kj]

——————————————————————————–
I have a INDESIT WIDL 126 about 2 years old and out of warenty. About 3 months ago the main control board shorted out between tracks which in the end i could’nt repair so i got another. This was fitted and the machine ran like new untill now, once you turn the machine on it try’s to run a program for a moment after about 2 mins the machine stops and just fills and drains for 10 mins while this is happening the 3rd and 4th green led’s flash and the main red flashes fast. I have checked the main board again and can’t see any signs of damage pls help thanx
——————————————————————————–
After this i was told to check for any blockages in the pressure chmber and if this was clear change the pressure switch which i have done. i have to admit a mistake in the original post it is the 3rd and 4th green led that are flashing as well as the main red one 😳

[Dave_Conway]

Re: I have changed the pressure switch no luck INDESIT WIDL

That looks like an F03 fault in that case, temperature control problem.

Use the search and look for F03, plenty on that one in the Indesit and Ariston related posts 🙂

Power off when going in :zap:

Dave.

[Author]

Posts