Hotpoint WMA13P

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMA13P

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 12, 2006 at 8:00 am #17083
    Bryan
    Participant

    Above machine with small tear in sump hose , nice easy job I thought , but when it came to ordering the part it seems I need to order sump kit 1604035.
    Is the sump hose available on its own or do I need to fit all the parts as a modification :?:.

    Serial No. 04177886

    Thanks

    Bryan

    April 12, 2006 at 8:40 am #172911
    iadom
    Moderator

    Re: Hotpoint WMA13P

    Been like that for a while Bryan, had a small hole in a sump hose almost 3 years ago, had to fit the kit.

    Jim.

    April 12, 2006 at 8:42 am #172912
    Dave_Conway
    Participant

    Re: Hotpoint WMA13P

    It is now 🙁

    Comes with new pressure switch, pressure hose, sump hose and pump flap valve 😕

    Dave.

    April 12, 2006 at 11:53 am #172913
    Bryan
    Participant

    Re: Hotpoint WMA13P

    Thanks guys , sump hose kit it is then.
    Just curious , but does anyone (Jim probably) know the reason for this modification :?.

    Cheers

    Bryan

    April 12, 2006 at 3:33 pm #172914
    iadom
    Moderator

    Re: Hotpoint WMA13P

    Well the new flap valve was to cure a problem with the valve sticking intermittantly. It is certainly a better seal with the later all rubber sump as opposed to the plastic one with the thin rubber strip round the inside, they leak quite often. not sure of the actual reason ❓

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.