Smeg DWF66 Impeller died

Home › Forums › Public Support Forums › Spare Parts Help › Smeg DWF66 Impeller died

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 13, 2006 at 9:07 am #17108
    timinder
    Participant

    Hi, Hope this is in the right part of the forum!
    I was recently given a Smeg DWF66 that had stopped working. 8) The Previous owner said that it had developed a very slight leak and then after a few months given up completely.
    After firing it up, I noticed that everthing was working apart from the impeller pump.
    After taking it off and stripping down I found that the threaded connection between motor and impeller had snapped, and this was also where the water had been leaking from (the bearing in the motor is shreiking like a banshee, but I’ve got a spare). I’m pretty sure I just need the white plastic impeller assembly. I’ve used a photo from another thread and highlighted the bit I need:

    Is there anything else I should be aware of?

    thanks

    Tim
    8)

    April 13, 2006 at 10:48 am #173011
    Dave_Conway
    Participant

    Re: Smeg DWF66 Impeller died

    You should be OK just replacing the pump housing if a new bearing in the motor does the trick 🙂

    Part number 690070529 at £32.07 ex VAT and carriage, an email to spares@ukwhitegoods.co.uk please if you’d like one

    Dave.

    April 13, 2006 at 11:03 am #173012
    timinder
    Participant

    Re: Smeg DWF66 Impeller died

    Thanks! Email sent…

    Tim

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.