zanussi fl1081 bearing

Home › Forums › Public Support Forums › Spare Parts Help › zanussi fl1081 bearing

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 14, 2006 at 12:44 pm #17143
    craigybell
    Participant

    The drum bearing for my zanussi fl1081 washer needs replacing again. I replaced it in November but it sounds as if its gone again.machine also leaking water.Is it time to give up and scrap the old girl?? If so any recommendations around the £300 mark
    type p6596303 prod no. 91478915/00

    Thanks

    April 14, 2006 at 6:01 pm #173132
    Penguin45
    Participant

    Re: zanussi fl1081 bearing

    craigybell wrote:Decided to repair machine and have dismantled it.Looks as if I need a new spider as well since its heavily scored where the inner bearing is seated and also where the outer bearing has contacted it.Probably was scored the previous time the bearings went and I should have changed it then bah!

    Drum support is in shop@ here:
    http://www.ukwhitegoods.co.uk/modules.p … cts_id=144

    as are the bearing kit and tub seal.

    Better luck this time,
    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.