Bendix BIW100 Bearing Kit

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Bendix BIW100 Bearing Kit

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 24, 2006 at 11:52 am #17332
    Phidom
    Participant

    Is this the same as the Zanussi 1000 spin kit, i.e. 6204 & 6205? I seem to recall some Tricity Bendix models having smaller bearings.
    Cheers, Phil

    April 24, 2006 at 12:57 pm #173827
    Dave_Conway
    Participant

    Re: Bendix BIW100 Bearing Kit

    I think this may be a 6205 and a 6206 for this model, the sizes are:

    1 of 30X62X16
    1 of 25X52X15

    I don’t have a bearing at hand to measure but that should help 🙂

    Dave.

    April 24, 2006 at 4:11 pm #173828
    Phidom
    Participant

    Re: Bendix BIW100 Bearing Kit

    Thanks Dave, looks like it won’t be a viable repair then as the seal from Connect is £9.40 + VAT special order and the spider is megga bucks. It is a drum out the top job so I would have to charge extra labour anyway.

    April 25, 2006 at 7:11 pm #173829
    Phidom
    Participant

    Re: Bendix BIW100 Bearing Kit

    Customer decided to get a new machine so I took the Bendix for reconditioning. I’ve not stripped it yet but did take off the pulley and the outer bearing is a 6204 i.e. 20 x 47 x 14. So it looks like it is the standard Zanussi setup. Electrolux group always were bad for giving the wrong information on bearings, spiders etc. 🙁

    April 25, 2006 at 8:22 pm #173830
    Penguin45
    Participant

    Re: Bendix BIW100 Bearing Kit

    Just looked it up on TDS – pnc 91420300900 – and it’s all listed for the 6204/5 set up.

    There are two other BIWs listed – BIW100Ws, but these are split case machines with the big bearing set up.

    Personally, if you go with pnc rather than model number, the info is usually spot on.

    Cheers,
    Chris.

    April 26, 2006 at 11:30 am #173831
    Phidom
    Participant

    Re: Bendix BIW100 Bearing Kit

    Thanks Chris, yes that is the Product No. At least it makes it viable to do the recon.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.