Bendix BIW100 Bearing Kit

[Phidom]

Is this the same as the Zanussi 1000 spin kit, i.e. 6204 & 6205? I seem to recall some Tricity Bendix models having smaller bearings.
Cheers, Phil

[Dave_Conway]

Re: Bendix BIW100 Bearing Kit

I think this may be a 6205 and a 6206 for this model, the sizes are:

1 of 30X62X16
1 of 25X52X15

I don’t have a bearing at hand to measure but that should help 🙂

Dave.

[Phidom]

Re: Bendix BIW100 Bearing Kit

Thanks Dave, looks like it won’t be a viable repair then as the seal from Connect is £9.40 + VAT special order and the spider is megga bucks. It is a drum out the top job so I would have to charge extra labour anyway.

[Phidom]

Re: Bendix BIW100 Bearing Kit

Customer decided to get a new machine so I took the Bendix for reconditioning. I’ve not stripped it yet but did take off the pulley and the outer bearing is a 6204 i.e. 20 x 47 x 14. So it looks like it is the standard Zanussi setup. Electrolux group always were bad for giving the wrong information on bearings, spiders etc. 🙁

[Penguin45]

Re: Bendix BIW100 Bearing Kit

Just looked it up on TDS – pnc 91420300900 – and it’s all listed for the 6204/5 set up.

There are two other BIWs listed – BIW100Ws, but these are split case machines with the big bearing set up.

Personally, if you go with pnc rather than model number, the info is usually spot on.

Cheers,
Chris.

[Phidom]

Re: Bendix BIW100 Bearing Kit

Thanks Chris, yes that is the Product No. At least it makes it viable to do the recon.

[Author]

Posts