- This topic has 1 reply, 2 voices, and was last updated 19 years, 12 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
I have a 15 month old model that has insufficient torque from the motor to start the drum rotating. It only starts with a hand push and will not restart upon the reverse cycle unless assisted by hand.
Consequently it begins to overheat. A new heater element has been fitted but this will probably fail if the motor is left unattended.
Any suggestions to correcting this problem please ?
Re: Indesit dryer model IS70C
It sounds as if the capacitor has failed, you can get one here:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=315
Power off please :zap: when checking.
If you’re unsure, please check the repairs@ link below for an engineer 🙂
Dave.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.