- This topic has 1 reply, 2 voices, and was last updated 19 years, 11 months ago by
.
-
Posts
-
i have a problem with the aquarius wd420 while it fills and heats the motor struggles to tumble i have changed the motor but still no joy, my next step is the control module, but they are costly if it is not any advice would help
Re: hotpoint wd420 washer dryer
My advice would have been to get the machine checked out before you changed the motor, you are covered by a full five years parts warranty on these machines, Hotpoint would have fitted all the parts required for just under £90.00 labour charge. The machine should be showing error messages by flashing the lights on the left hand side of the control panel.
I think it is a case of when you are in a hole stop digging. The Hotpoint/Indesit engineers ( your machine has the great misfortune to have Indesit electronics in it) have special tools and software on their laptops for diagnostic checks that are not available to the independant trade. If you change the module after changing the motor you will have spent (wasted) around £150 upwards, way above their labour charge, and may still not cure the fault.
Swallow your pride and ring Hotpoint or click the link in my sig to see if we have someone who can help.
- You must be logged in to reply to this topic.