Bosch wok 2001

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch wok 2001

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • May 3, 2006 at 10:02 pm #17571
    7390ROBERTS
    Participant

    Hi Guys does anybody know what the error code 03 means on this machine had a call to repair it today it would not finish the cycle customer told me their was water in drum so looked for blockages in pump etc Then checked pump motor and impulse paths from PCB. All ok so asume fault is PCB. have not worked on these Machines before so wondered if i was missing something any advice much appreciated Machine 6 years old Serial no E-NR WOK 2001GB/05FD7909 00642

    MANY THANKS ROB

    May 3, 2006 at 10:05 pm #175316
    gegsy
    Participant

    Re: Bosch wok 2001

    Hi Rob
    It basically means it can’t empty for whatever reason.
    Check pump, drain hose etc
    There is a filter on the front behind flap, check there for debris.

    Greg

    May 3, 2006 at 10:18 pm #175317
    7390ROBERTS
    Participant

    Re: Bosch wok 2001

    Thanks for quick reply Greg checked all the pipes and pump was all clear could the PCB cause this error code or have i missed something.

    Thanks Rob

    May 3, 2006 at 10:46 pm #175318
    gegsy
    Participant

    Re: Bosch wok 2001

    Back to basics, check pump for resistence, pressure system etc

    Greg

    May 3, 2006 at 11:00 pm #175319
    7390ROBERTS
    Participant

    Re: Bosch wok 2001

    Will do cheers Greg

    Rob

    May 3, 2006 at 11:01 pm #175320
    gegsy
    Participant

    Re: Bosch wok 2001

    FYI in 10 yrs never had pcb fail on these 😉

    Greg

    May 3, 2006 at 11:08 pm #175321
    Penguin45
    Participant

    Re: Bosch wok 2001

    Had some very strange pressure switch problems on these………

    Chris.

    May 3, 2006 at 11:17 pm #175322
    7390ROBERTS
    Participant

    Re: Bosch wok 2001

    Right Mate i will try that but she is away on holiday for few days will let you know the outcome.

    thanks again Guys

    Rob

    May 14, 2006 at 9:47 pm #175323
    7390ROBERTS
    Participant

    Re: Bosch wok 2001

    Problem solved was an intermitent wiring fault on pump.

    Thanks for help

    Rob

    May 14, 2006 at 9:48 pm #175324
    gegsy
    Participant

    Re: Bosch wok 2001

    Thanks for sharing that Rob, as we have not seen all faults.

    Many thanks again

    Greg

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.