Tricity Bendix DHo86 Overrun

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Tricity Bendix DHo86 Overrun

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 7, 2006 at 3:58 pm #17648
    velocette
    Participant

    Machine stops during wash cycles. Assumed timer was at fault and replaced to no avail. When first tested, the heater appeared not to function. When tested again some weeks later, machine seemed to take ages to heat the water. After about 15-20 minutes with the water pumping round getting hotter and hotter I got worried it might overheat and stopped the machine.
    Could the thermostat have failed, any suggestions as to next move please.

    May 7, 2006 at 4:17 pm #175609
    Simon46
    Participant

    Re: Tricity Bendix DHo86 Overrun

    You could try cleaning the slime/ gunge out of the little blue tubes housed under the dome (screw in top) if you lift out the filter assembly. The lump can be seen under the lower wash arm. Remember how they came out!

    Regards
    Simon

    May 7, 2006 at 5:13 pm #175610
    Penguin45
    Participant

    Re: Tricity Bendix DHo86 Overrun

    http://www.ukwhitegoods.co.uk/modules.p … ge&pid=104

    Penguin45.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.