LG WM 1280FHD BEARINGS NOISEY

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LG WM 1280FHD BEARINGS NOISEY

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • May 8, 2006 at 10:45 pm #17673
    alro
    Participant

    JUST ASKING HAS ANYBODY HAD THIS JOB TO DO
    HELP ON WHAT TO LOOK OUT FOR AS NEVER DONE THEM BEFORE

    THANKS
    ALRO

    May 8, 2006 at 10:56 pm #175697
    Penguin45
    Participant

    Re: LG WM 1280FHD BEARINGS NOISEY

    Think Hotpoint 95 and you won’t go too far wrong……..

    Chris.

    May 10, 2006 at 9:41 pm #175698
    alro
    Participant

    Re: LG WM 1280FHD BEARINGS NOISEY

    THANKS CHRIS MORE LIKE A ZANUSSI BUT TUB TAKEN OUT FROM TOP OF CABINATE SPLIT TYPE REMOVED DIRECT DRIVE MOTOR FIRST

    THE FEAR TAKEN OUT OF JOB BY SAYING IT WAS LIKE HOTPOINT 95


    ALRO

    May 10, 2006 at 11:17 pm #175699
    eastlmark
    Moderator

    Re: LG WM 1280FHD BEARINGS NOISEY

    Pretty sure that tub comes out the front, far easier that way.

    BTW caps lock off next time, Alro.

    May 11, 2006 at 3:15 am #175700
    admin
    Keymaster

    Re: LG WM 1280FHD BEARINGS NOISEY

    Hi Alro

    This may have the old style tank which has the front of the tub plate that comes off or that the tank comes completely out of the front in one go dependant if the bearings have ben changed previously.either way the thank can come out of the front of the machine.

    bryan

    May 11, 2006 at 7:30 pm #175701
    AMS
    Participant

    Re: LG WM 1280FHD BEARINGS NOISEY

    Hi guys,

    I’ve just had an enquiry about a bearing job on a LG WM1460FHD. Before I take it on, I just wanted to know if it’s pretty much as described previously. Does it being direct drive cause any aditional complications? Anyone got a number for the bearing kit and any other parts required. What are the bearing sizes?

    Cheers,

    Dave

    May 11, 2006 at 7:54 pm #175702
    farmboy
    Participant

    Re: LG WM 1280FHD BEARINGS NOISEY

    Dunno about bearing sizes but the tub design is similar to the Zanussis and will come out through the front. Direct drive system is easy – remove the pulley(rotor) then unbolt the winding assembly.

    May 11, 2006 at 8:03 pm #175703
    AMS
    Participant

    Re: LG WM 1280FHD BEARINGS NOISEY

    Thanks Farmboy. 🙂

    May 11, 2006 at 9:38 pm #175704
    alro
    Participant

    Re: LG WM 1280FHD BEARINGS NOISEY

    AMS or DAVE

    PT No 4280FR4048E BEARING
    4280FR4048D BEARING
    4036ER3002A SEAL BEARING
    4036ER4001A TUB SEAL

    SEME NEDIS CD

    HOPE THIS HELPS EASY TO TAKE TUB OUT OF TOP OF CABINATE ONCE
    YOU HAVE REMOVED DRAW AND WATER VALVES LAY ON ITS SIDE .THEN THERES NO MESS TAKING THE FRONT OFF JUST DIRECT DRIVE MOTOR

    CHEERS ALRO

    May 12, 2006 at 6:39 pm #175705
    AMS
    Participant

    Re: LG WM 1280FHD BEARINGS NOISEY

    Thanks very much Alro. Sounds pretty straightforward.

    Dave

    May 15, 2006 at 4:14 pm #175706
    CDS
    Participant

    Re: LG WM 1280FHD BEARINGS NOISEY

    You can get the back half of the tub, which makes life a lot easier.

    If you do go down this route it is worth ordering in a heater as well as 95{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time they leak when you put them back.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.