Hpt/Bosch d/w Dispeners – UK Whitegoods

This topic has 14 replies, 9 voices, and was last updated 19 years, 11 months ago by Turbo.

Viewing 15 posts - 1 through 15 (of 15 total)

Author

Posts
May 12, 2006 at 4:27 pm #17775

Turbo
Participant

Hi
Does anyone know the Bosch part number that is equivalent to Hotpoint prt number 1801201 as Hotpoint are charging silly money on these.
eg Hpt 1801684 £42.77 trade. equivalent Bosch Prt 490467 £26.21 trade a difference of £16.56 for the same dispenser 😥

Thanks Turbo

May 12, 2006 at 4:40 pm #176306

Dave_Conway
Participant

Re: Hpt/Bosch d/w Dispeners

If it’s the sliding door type it should be either 263088 “WITH STEAM VENT BEHIND DISPENSER DOOR” or 265837 “NO STEAM VENT BEHIND DISPENSER DOOR”

Pardon the CAPS, copying and pasting 😉

Dave.

May 12, 2006 at 4:59 pm #176307

Turbo
Participant

Re: Hpt/Bosch d/w Dispeners

Hi Dave
The dispenser I am after has the sliding door with steam vent so must be 263088 this is £12.41 cheaper than the over priced Hotpoint part.
Thank for your quick reply
Turbo

May 12, 2006 at 5:41 pm #176308

rocker
Participant

Re: Hpt/Bosch d/w Dispeners

Turbo or Dave
I need to buy part No 490467 soap dispenser, you mention price of £26.21 trade can you tell me were I can buy at this price.
Cheers John

May 12, 2006 at 7:12 pm #176309

Martin
Participant

Re: Hpt/Bosch d/w Dispeners

rocker wrote:you mention price of £26.21 trade can you tell me were I can buy at this price

Open an account with BSH Appliance Care Ltd and you can buy it at that price or fractionally cheaper in fact 😉

May 12, 2006 at 7:33 pm #176310

rocker
Participant

Re: Hpt/Bosch d/w Dispeners

Thanks Martin. Will do. John

May 13, 2006 at 6:46 am #176311

funkyboogy
Participant

Re: Hpt/Bosch d/w Dispeners

hi martin,
where do you apply for a bosch account, had a look at their web site , but cant see anywhere to apply,
cheers ally

May 13, 2006 at 7:36 am #176312

Martin
Participant

Re: Hpt/Bosch d/w Dispeners

funkyboogy wrote:where do you apply for a bosch account,

Ring their Accounts Department 😉

May 13, 2006 at 8:10 am #176313

funkyboogy
Participant

Re: Hpt/Bosch d/w Dispeners

cheers i will go look for a tel no,
ally.
ps are they about the cheapest for gen bosch spares ..

May 13, 2006 at 11:12 am #176314

Turbo
Participant

Re: Hpt/Bosch d/w Dispeners

Hi rocker
The £26.21 price was from Connect Distrution Ltd. Was going to use them to avoid paying the carriage charge.
Turbo

May 13, 2006 at 12:15 pm #176315

eastlmark
Moderator

Re: Hpt/Bosch d/w Dispeners

while we are on this subject, how do you all fit these things? I have had some nasty ones over the years that just wont sit in nicely and there is only so much pressure you can put on those stainless inner doors.

May 13, 2006 at 12:55 pm #176316

gegsy
Participant

Re: Hpt/Bosch d/w Dispeners

Hya Mark
With the newer bosch/neff, I tend to after removal of old dispenser, bend the stainless flanges in slightly, and lightly lubricate the rubber seal of new dispenser.
Offer it into aperture, one hand on top one underneath of dispenser. With firm pushes it should locate and lock in.

Greg

May 14, 2006 at 10:49 pm #176317

alro
Participant

Re: Hpt/Bosch d/w Dispeners

hi guys
Pt number 490467 £24.45 +VAT
Qualtex

cheers ALRO

May 14, 2006 at 10:56 pm #176318

Penguin45
Participant

Re: Hpt/Bosch d/w Dispeners

Forgot about this – why does anyone want a whole dispenser? You can get the sliding flap, the flap spring and the actuator all as spares – I’ve never needed anything else.

Chris.

May 15, 2006 at 7:33 am #176319

eastlmark
Moderator

Re: Hpt/Bosch d/w Dispeners

gegsy wrote:Hya Mark
With the newer bosch/neff, I tend to after removal of old dispenser, bend the stainless flanges in slightly, and lightly lubricate the rubber seal of new dispenser.
Offer it into aperture, one hand on top one underneath of dispenser. With firm pushes it should locate and lock in.

Greg

Thanks Greg, thats generaly the way I do it but as with most things they dont always go in that easily….as for Chris messing about with the flap and spring…no thanks, gave that up years ago.
Author

Posts