Whirlpool ADG332 Error Code – POWER LED 6 flashes

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool ADG332 Error Code – POWER LED 6 flashes

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 14, 2006 at 6:45 pm #17804
    davethebassuk
    Participant

    Guys

    Re: Whirlpool ADG332 (rating plate no: 8542 332 15510)

    Re-posting this message, as I didn’t a get a reply to the original …

    Original Problem: The machine didn’t respond to any control inputs at all. No lights/LEDs illuminate when the programme selector is turned from OFF to one of the three programme modes or when the POWER pushbutton is pressed.

    I fitted a new Main Control PCB (481221478477) which you kindly supplied. This has improved the situation, but machine still has a problem …

    Current Problem: Programme selector LEDs now illuminate when the programme selector is turned from OFF to one of the three programme modes. When the POWER pushbutton is pressed, the programme initiates (POWER LED illuminates and drain pump runs for ~20 secs) then the POWER LED flashes an error code(?) 6 flashes repeated.

    I’d really appreciate any further advice you can offer?

    Thanks again
    Dave

    May 14, 2006 at 7:00 pm #176455
    Dave_Conway
    Participant

    Re: Whirlpool ADG332 Error Code – POWER LED 6 flashes

    Probably a flow meter problem in that case by the sounds of it. These threads should help:

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=11785

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=12186

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=12696

    🙂

    Dave.

    May 15, 2006 at 6:17 pm #176456
    DentedPorsche
    Participant

    Re: Whirlpool ADG332 Error Code – POWER LED 6 flashes

    As Dave says, probably flowmeter problem. Also check that the inlet valve is open and that the hose hasn’t been kinked when putting the dishwasher back in place.

    DP

    May 16, 2006 at 12:39 am #176457
    davethebassuk
    Participant

    Re: Whirlpool ADG332 Error Code – POWER LED 6 flashes

    Thanks guys

    Think the hose must have been kinked. Works fine now.

    Cheers
    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.