smeg A2 element replacement

Home Forums Public Support Forums Help And Support Cooker And Oven Forum smeg A2 element replacement

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #17846
    clivers
    Participant

    Could someone please advise how you change the fan element on a smeg A2 oven, is it from the rear of the oven?

    many thanks

    clivers

    #176621
    Dave_Conway
    Participant

    Re: smeg A2 element replacement

    From the rear and from inside the oven cavity itself 😉

    With the power off of course :zap:

    Dave.

    #176622
    clivers
    Participant

    Re: smeg A2 element replacement

    thanks Dave, do you know where i could get one of these elements from as the cooker is being removed for a new floor to be layed and I’ll have the opportunity to replace it while it’s disconnected from the mains!!! 🙂

    #176623
    Dave_Conway
    Participant

    Re: smeg A2 element replacement

    clivers wrote:thanks Dave, do you know where i could get one of these elements from

    Yes, right here from our shop – ELE4207 😀

    Dave.

    #176624
    clivers
    Participant

    Re: smeg A2 element replacement

    excellent, could you tell which replacement option is easiet, inside or from the rear? 😀

    #176625
    Dave_Conway
    Participant

    Re: smeg A2 element replacement

    You need to do it from both ends 🙂

    Dave.

    #176626
    clivers
    Participant

    Re: smeg A2 element replacement

    Morning Dave, will the spare part come with installation instructions, or can you point me in the right direction ❓

    #176627
    Dave_Conway
    Participant

    Re: smeg A2 element replacement

    It won’t I’m afraid, no spare parts do…

    There’s loads of info in the forums here though about replacing fan elements on cookers, the same basic principal applies 🙂

    Dave.

    #176628
    clivers
    Participant

    Re: smeg A2 element replacement

    I’ve ordered the part, (very helpful chap on the phone thank you), I’ll take a look at the forums for help. Thanks again, what a great service!! 😀

    #176629
    clivers
    Participant

    Re: smeg A2 element replacement

    All done and working a treat, thanks for all the advice 😀

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.