Hoover Tumble Drier HDV6UK Relay Board?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Hoover Tumble Drier HDV6UK Relay Board?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 22, 2006 at 6:19 pm #17990
    laurenceuk
    Participant

    Hi,

    When the On button is pressed the relay contacts `rattle` and won`t stay engaged, drum stops rotating when finger removed from switch.

    Q1. The customer says the `on/off` switch won`t stay in but (I don`t see these that often) I suspect the `on/off` switch is just a push and release start switch. Am I right? If so the labelling of the start switch on the panel is misleading as it reads `on/off`

    Q2. I also suspect that the relay is the problem – again, am I right?

    If so can someone give the part number for the relay board please.

    Thanks

    Laurence

    Serial No 3110023

    May 22, 2006 at 8:04 pm #177310
    Penguin45
    Participant

    Re: Hoover Tumble Drier HDV6UK Relay Board?

    It’s a non-latching switch and it’s always the relay board.

    http://www.ukwhitegoods.co.uk/modules.p … cts_id=347

    Chris.

    May 22, 2006 at 8:16 pm #177311
    laurenceuk
    Participant

    Re: Hoover Tumble Drier HDV6UK Relay Board?

    Thanks Chris

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.