Hotpoint DWF31P/17 SGSHPE4GB Dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint DWF31P/17 SGSHPE4GB Dishwasher

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 31, 2006 at 8:17 pm #18194
    aqualectric
    Participant

    Hotpoint DWF31P SGSHPE4GB Dishwasher dispenser problems.

    Fitted a new dispenser unit to this machine and the powder door won’t release. Tried a direct mains supply lead on the new part – door releases. Then tried the old unit again – also releases the door perfectly. 😳 Took out the module and on very close inspection, the triac (??) directly above the dispenser connection plug looks suspect (it looks as if a piece of the body has chipped off). New PCB time!!
    Looked on Connections (pt. no. 5031 689 465 298) module is now obsolete!! 😯
    Anyone know of a possible alternative PCB or where I could obtain one. Anyone had the same fault? Surely a PCB shouldn’t fail just working the dispenser unit; especially as it’s a Bosch clone. 😕

    Thanks,

    Steve.

    May 31, 2006 at 9:56 pm #178072
    Dave_Conway
    Participant

    Re: Hotpoint DWF31P/17 SGSHPE4GB Dishwasher

    Hmm, Hotpoint show it as obsolete as well 😕

    As it’s a common module, send it to EMW http://www.emwelec.co.uk they should be able to repair it for you 🙂

    Dave.

    May 31, 2006 at 9:58 pm #178073
    Dave_Conway
    Participant

    Re: Hotpoint DWF31P/17 SGSHPE4GB Dishwasher

    Eek :eeek:

    http://www.emwelec.co.uk :

    Bandwidth Limit Exceeded
    The server is temporarily unable to service your request due to the site owner reaching his/her bandwidth limit. Please try again later.

    01623 647537 – try the good old phone instead 😉

    Dave.

    May 31, 2006 at 10:28 pm #178074
    aqualectric
    Participant

    Re: Hotpoint DWF31P/17 SGSHPE4GB Dishwasher

    Cheers, Dave. I’ll try them tomorrow.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.