F&P Smartdrive MW059 – 00001001 error code

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › F&P Smartdrive MW059 – 00001001 error code

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 2, 2006 at 7:58 am #18227
    justdunc
    Participant

    Hi All

    New motor control module has been installed after the machine died mid load.

    Have been able to empty the water in diagnotics mode.

    Get 00001001 when I try normal operation

    Any ideas on the cause?

    Thanks

    June 2, 2006 at 8:49 am #178219
    justdunc
    Participant

    Re: F&P Smartdrive MW059 – 00001001 error code

    Problem solved after searching and searching through this forum

    Thanks to penguin45 who posted the solution in another post

    Here’s the solution:

    Penguin45 wrote:You’re halfway there – now you’ve got the size error. So – Press and hold “Water temperaure up”, then press “Power”. You should now have up to three LEDs lit – “cold water”, “low water” and “hold”. For a 5kg machine, press “wash temp up”, then “power”. For a 6kg machine, press “water level up”, then “power”. For 7kg, press “spin speed up”, then “power”.

    To see if you’ve got it right, start a programme……..


    Penguin45.

    I did press “wash temp up”, then “power” for my 5kg machine

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.