Old Servis made washing machine valves Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Old Servis made washing machine valves This topic has 6 replies, 6 voices, and was last updated 19 years, 10 months ago by Washman. Viewing 7 posts - 1 through 7 (of 7 total) Author Posts June 7, 2006 at 1:41 pm #18332 WashmanParticipant Hi Any one have part numbers for the hot and cold fill valves with larger than standard outlets (dual cold 90deg / hot 90deg) Old Servis made machine no model no avalable. Thanks in advance Mike June 7, 2006 at 4:50 pm #178622 Penguin45Participant Re: Old Servis made washing machine valves Maddocks still have the double valve 3367 listed as 71-SV-01. No listing for the single one – maybe have a word with a commercial laundry supplier? Chris. June 7, 2006 at 5:07 pm #178623 MickGeorgeParticipant Re: Old Servis made washing machine valves Think Connect still do a pattern dual cold valve part no VAL3634.. sorry havn’t got a hot valve no.. June 7, 2006 at 5:12 pm #178624 MickGeorgeParticipant Re: Old Servis made washing machine valves oops.. just re read the post and you wanted 90deg valves… the number I gave you was for ordernary straight through type… sorry 😳 June 7, 2006 at 6:07 pm #178625 whitevanmanParticipant Re: Old Servis made washing machine valves Hotpoint 95/wm series will fit, Cut length of cold fill pipe to fit to end of spigot (very tight fit) use debor then fit hose from dispensor over mod use jubillee clip and tighten. Never had one fail yet. Hope this helps Wvm June 7, 2006 at 6:28 pm #178626 wilfParticipant Re: Old Servis made washing machine valves if the hoses are too big clamp them down with a SMALL jubilee clip. if its the one I think you mean you should have no trouble wilf June 7, 2006 at 10:34 pm #178627 burnsParticipant Re: Old Servis made washing machine valves These were done by washvac as pattern Invicata parts. they werent expensive. genuine part no 534006701 double / 534000301 single Author Posts Viewing 7 posts - 1 through 7 (of 7 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In