Diplomat ADP8242

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Diplomat ADP8242

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • June 15, 2006 at 3:04 pm #18508
    goosegreen
    Participant

    Have a strange fault with the above machine Fills normaly goes to wash for 1.5 mins then the machine stops dead with no lights flashing.
    Checked Heater, pressure system, Pump and fill matrix all OK Begining to think PCB any help appceiated

    Goose

    June 15, 2006 at 4:10 pm #179249
    Dave_Conway
    Participant

    Re: Diplomat ADP8242

    Dispensor solenoid possibly ? 🙂

    Dave.

    June 15, 2006 at 7:46 pm #179250
    goosegreen
    Participant

    Re: Diplomat ADP8242

    Dave, I should have remembered that from all the previous posts on the subject. Could I just wire in a good coil to see if it cures the fault before I order a new dispenser?

    Goose

    June 15, 2006 at 8:19 pm #179251
    gegsy
    Participant

    Re: Diplomat ADP8242

    In a word Yes” 😉

    Greg

    June 15, 2006 at 9:55 pm #179252
    goosegreen
    Participant

    Re: Diplomat ADP8242

    Thanks Guys
    This is for a very long standing and loyal customer of mine and
    one who I would go the extra mile for. So I hope its the
    dispenser rather than the PCB as I know she cant afford the price of a new circuit board.

    Cheers Goose

    June 16, 2006 at 4:51 pm #179253
    goosegreen
    Participant

    Re: Diplomat ADP8242

    Called back today, Fitted new coil same fault! In desperation I adjusted the water level on the P/switch Remade the conections to the new coil and It then started working ok 😕 Not sure now if it was just a bad connection the the wax motor on the dispenser or a water level prob.
    told cust to try it over the weekend and I will call back Monday

    Goose

    June 22, 2006 at 7:24 pm #179254
    goosegreen
    Participant

    Re: Diplomat ADP8242

    Called back on Monday, Worked fine all weekend must have been down to bad connection on the dispenser

    Thanks All

    Goose

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.