- This topic has 3 replies, 2 voices, and was last updated 19 years, 10 months ago by
.
-
Posts
-
We have a machine about 4 years old. It works perfectly beautiful wash and dry, except very noisy.
When machine program is started, there is delay of a few seconds then the noise starts and its very loud growling noise
Is it the pump becasue I think the drums not turning at this point.
It never used to do this!
Re: Hotpoint Washer Dryer – Noisy
bornlivelife wrote:Is it the pump becasue I think the drums not turning at this point
It sounds like it or there’s something in the pump rattling around. Which model number is it to identify the correct one ?
Power off if looking inside please :zap:
Dave.
Re: Zanussi Washer Dryer – Noisy
Hello – im sorry its a Zanussi Jetsystem excel 1250
WJS 1397W
product 914639503
type 6297753
Serial no; 128 00390What pump would that need?
Re: Hotpoint Washer Dryer – Noisy
There are two pumps on this model, the drain pump is here in our shop@
http://www.ukwhitegoods.co.uk/modules.p … cts_id=394
The circualtion pump is a bit more at £40 odd. You’ll need to check which one has failed and it may be the latter as that one runs almost continuously when there is water in the drum.
An email to spares@ukwhitegoods.co.uk please if the recirculation pump is required 🙂
We are only assuming that it is one of the pumps of course 😉
Dave.
- You must be logged in to reply to this topic.