AEG SANTO1688

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG SANTO1688

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 10, 2006 at 10:13 am #19033
    rickard
    Participant

    AEG SANTO 1688-7TK

    PRODUCTION NO 923649586

    SERIAL NO 31800093

    Larder frridge runs until you open door and then interior light flashes to tell customer there is a fault the compressor also switches off (back up mode). The control lights flash quickly twice then short pause flash once and then repeats itself. There is only a choice of two sensors or the electronic board. Can anyone advise on which it is and possibly a part no as i do not want to price the job for all three parts.

    Many Thanks

    July 10, 2006 at 11:02 am #181431
    Dave_Conway
    Participant

    Re: AEG SANTO1688

    There is no tech information for this model for fault codes etc but I would go for the thermistors first, they are supplied as one part:

    Part number – 2262608033 list price £22.11

    The PCB is 2260613407 at £67.20

    Dave.

    July 10, 2006 at 11:14 am #181432
    rickard
    Participant

    Re: AEG SANTO1688

    Thanks for the information Dave. I suspect the sensors and will try them first.

    August 17, 2006 at 10:50 pm #181433
    lfcjoey
    Participant

    Re: AEG SANTO1688

    with my experience the sensors will be fine, unfortunately a new main PCB will be required.

    August 18, 2006 at 4:03 pm #181434
    Tubs
    Participant

    Re: AEG SANTO1688

    Hi

    P.C.B for sure, Had this twice and also confirmed by my good old friend Mr AEG service engineer.

    Steve

    August 18, 2006 at 6:59 pm #181435
    rickard
    Participant

    Re: AEG SANTO1688

    orderer sensors still the same, went back today with pcb.and all is well.
    lucky the customer was fine about it and paid the extra.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.