AEG SANTO1688

[rickard]

AEG SANTO 1688-7TK

PRODUCTION NO 923649586

SERIAL NO 31800093

Larder frridge runs until you open door and then interior light flashes to tell customer there is a fault the compressor also switches off (back up mode). The control lights flash quickly twice then short pause flash once and then repeats itself. There is only a choice of two sensors or the electronic board. Can anyone advise on which it is and possibly a part no as i do not want to price the job for all three parts.

Many Thanks

[Dave_Conway]

Re: AEG SANTO1688

There is no tech information for this model for fault codes etc but I would go for the thermistors first, they are supplied as one part:

Part number – 2262608033 list price £22.11

The PCB is 2260613407 at £67.20

Dave.

[rickard]

Re: AEG SANTO1688

Thanks for the information Dave. I suspect the sensors and will try them first.

[lfcjoey]

Re: AEG SANTO1688

with my experience the sensors will be fine, unfortunately a new main PCB will be required.

[Tubs]

Re: AEG SANTO1688

Hi

P.C.B for sure, Had this twice and also confirmed by my good old friend Mr AEG service engineer.

Steve

[rickard]

Re: AEG SANTO1688

orderer sensors still the same, went back today with pcb.and all is well.
lucky the customer was fine about it and paid the extra.

[Author]

Posts