Whirlpool AWM8103

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWM8103

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 11, 2006 at 4:53 pm #19084
    iadom
    Moderator

    Customer just phoned.

    Set programme, machine starts to fill for about 10 seconds then ‘door open’ light flashes and machine stops.

    Is this just a dodgy door lock or do I need to look elswhere?

    July 11, 2006 at 7:36 pm #181663
    gegsy
    Participant

    Re: Whirlpool AWM8103

    Sounds like a door problem; as in catch or interlock Jim, anything else and it would put an error code up.
    I remember some of the newer Zanussi doing this very fault, whatever relevence that has 😀

    Greg

    July 11, 2006 at 7:38 pm #181664
    iadom
    Moderator

    Re: Whirlpool AWM8103

    Will, ‘suck it and see’

    Jim. :tup:

    July 11, 2006 at 7:44 pm #181665
    mbdas
    Participant

    Re: Whirlpool AWM8103

    Hi 🙂 I went to one the other day customer had fitted a new door switch before calling me and that turned out to be just the carbons
    mark 🙂

    July 11, 2006 at 7:54 pm #181666
    johnmac11
    Participant

    Re: Whirlpool AWM8103

    mbdas wrote:Hi 🙂 I went to one the other day customer had fitted a new door switch before calling me and that turned out to be just the carbons
    mark 🙂

    I think Mark has got it, saw a few of these with wierd and wonderful faults and the first thing to check is the carbons.


    John

    July 11, 2006 at 8:34 pm #181667
    SparkyP
    Participant

    Re: Whirlpool AWM8103

    Hi Iadom
    It is definately the carbons 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure. When the door locks it checks the pump then the motor before filling. If the motor does not turn then the door lock light flashes.

    Sparkyp

    July 11, 2006 at 9:45 pm #181668
    iadom
    Moderator

    Re: Whirlpool AWM8103

    Thanks for all the replies folks, I will approach in the morning full of confidence. 8)

    July 15, 2006 at 5:44 pm #181669
    iadom
    Moderator

    Re: Whirlpool AWM8103

    forgot to update, went on Friday, new set of brushes, good as new. Thanks again folks. 🙂

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.